- product -
產品介紹:柔性防水套管的介紹 1.柔性防水套管一般穿過墻壁之處受有震動或有嚴密防水要求的構筑物。 2.柔性防水套管部分加工完成后,在其外壁均刷底漆一遍(底漆包括樟丹或冷底子油)。外層腐由設計決定。 3.套管處之墻壁,如遇非混凝土墻時應改用混凝土墻壁,其澆注混凝……



柔性防水套管的介紹
1.柔性防水套管一般穿過墻壁之處受有震動或有嚴密防水要求的構筑物。
2.柔性防水套管部分加工完成后,在其外壁均刷底漆一遍(底漆包括樟丹或冷底子油)。外層腐由設計決定。
3.套管處之墻壁,如遇非混凝土墻時應改用混凝土墻壁,其澆注混凝土范圍應比翼環直徑(D6)大200mm,而且必須將套管澆固與墻內。
4.穿管處之混凝土墻厚應不小于300mm,否則應使墻壁一邊加厚或兩邊加厚,加厚部分的直徑最小應比翼環直徑(D6)大200。
1、原材料:嚴格執行原材料標準;
2、生產工藝:嚴格把控,可追溯;
3、檢測中心:原材料、膠料過程、成品性能、壓力、爆破,定期檢測;
4、售后服務:過水產品 質保5年,耐高溫、耐酸堿、耐油質保3年,特殊介質,質保1年;凡是質量問題導致,12小時內給出書面答復,24小時內給出解決方案;如有質量問題,我廠退回全部貨款,并承擔拆裝費用和運輸費用;
1. Raw materials: strictly implement the standard of raw materials;
2. Production process: strict control, traceability;
3. Testing Center: raw materials, rubber process, finished product performance, pressure, blasting, regular testing;
4. After sales service: aquatic products are guaranteed for 5 years, high temperature resistance, acid and alkali resistance, oil resistance for 3 years, and special media for 1 year; if quality problems are caused, a written reply will be given within 12 hours, and solutions will be given within 24 hours; if there are quality problems, our factory will return all the payment, and bear the disassembly and transportation costs;
返回頂部